PROFILES
The profiles in the Profils Systèmes range are obtained by press extrusion, alloy no. 6060 BUILDING QUALITY, with impurity tolerances stricter than the standard.
PROTECTION
- By chemical anodizing with the « QUALANOD » label, available in natural and bronze finishes.
- Stock profiles are available in anodized finish class 20 (20 to 24 microns).
- By polyester powder coating with the « QUALICOAT » label, Seaside mention, and the « QUALILAQUAGE » and « QUALIMARINE » certifications.
- The minimum lacquer thickness is 60 microns for continuously visible surfaces.
FRAME
- Tubular with design on the interior and exterior, allowing clipping of the flange and cover strip.
- Assembly with miter cuts.
- Clipping of an aluminum rail.
SASHES
- Side and central profiles with design and tubular section, available in standard or reinforced versions, depending on the size and exposure of the structure.
- Crosspieces allow straight cut assembly using stainless steel screws.
ASSEMBLY
- Frames: miter cut assembly using pin brackets.
- Sashes: straight cut assembly with stainless steel screws in honeycomb.
- All assembly parts are made of aluminum or stainless steel.
SEALING
Sealing between the profiles is ensured by brush gaskets.
GLAZING
- Single or insulating glass, from 6 to 26 mm, installed in a portfolio-style configuration.
- Rebate height: 20 mm.
- Sealing trim compliant with DTU 39.
ROLLERS
- 25 mm rollers with needle bearings.
- Single or double rollers, adjustable or not, installed with pressure screws.
- Easy disassembly according to standard 24.301.
- Maximum glass loads are 250 kg per leaf depending on the configuration.
LOCKING
- 1-point locking with single shell or handle.
- 2-point or 3-point lock depending on the leaf height (optional).
- The mechanism is integrated into the tubular profile.
MAXIMUM DIMENSIONS
- For a 2-leaf sliding window:
- Maximum length: 3.50 m
- Maximum height: 2.60 m
- For a 2-leaf sliding window:
- Per leaf:
- Maximum length: 1.75 m
- Maximum height: 2.60 m
PROFILES
The profiles in the Profils Systèmes range are obtained by press extrusion, alloy no. 6060 BUILDING QUALITY, with impurity tolerances stricter than the standard.
PROTECTION
- By chemical anodizing with the « QUALANOD » label, available in natural and bronze finishes.
- Stock profiles are available in anodized finish class 20 (20 to 24 microns).
- By polyester powder coating with the « QUALICOAT » label, Seaside mention, and the « QUALILAQUAGE » and « QUALIMARINE » certifications.
- The minimum lacquer thickness is 60 microns for continuously visible surfaces.
FRAME
- Tubular with design on the interior and exterior, allowing clipping of the flange and cover strip.
- Assembly with miter cuts.
- Clipping of an aluminum rail.
SASHES
- Side and central profiles with design and tubular section, available in standard or reinforced versions, depending on the size and exposure of the structure.
- Crosspieces allow straight cut assembly using stainless steel screws.
ASSEMBLY
- Frames: miter cut assembly using pin brackets.
- Sashes: straight cut assembly with stainless steel screws in honeycomb.
- All assembly parts are made of aluminum or stainless steel.
SEALING
Sealing between the profiles is ensured by brush gaskets.
GLAZING
- Single or insulating glass, from 6 to 26 mm, installed in a portfolio-style configuration.
- Rebate height: 20 mm.
- Sealing trim compliant with DTU 39.
ROLLERS
- 25 mm rollers with needle bearings.
- Single or double rollers, adjustable or not, installed with pressure screws.
- Easy disassembly according to standard 24.301.
- Maximum glass loads are 250 kg per leaf depending on the configuration.
LOCKING
- 1-point locking with single shell or handle.
- 2-point or 3-point lock depending on the leaf height (optional).
- The mechanism is integrated into the tubular profile.
MAXIMUM DIMENSIONS
- For a 2-leaf sliding window:
- Maximum length: 3.50 m
- Maximum height: 2.60 m
- Per leaf:
- Maximum length: 1.75 m
- Maximum height: 2.60 m
