PROFILES
The profiles in the Profils Systèmes range are extruded using press spinning, alloy no. 6060 BUILDING QUALITY, with impurity tolerances that are stricter than the standard.
PROTECTION
Chemical anodising with the "QUALANOD" label, natural and bronze colours. Profiles in stock are available with a class 20 anodised finish (20 to 24 microns).
By polyester powder coating with the "QUALICOAT" label, Seaside mention, and the "QUALILAQUAGE" and "QUALIMARINE" labels. The minimum thickness of the coating is 60 microns for continuously visible surfaces.
FRAME
55 mm thick tubular frame with the option of clipping on flashings and joint covers.
Thermal break via bar.
OPENINGS
Straight tubular shape on the outside and inside, with straight glazing bead. Their thickness is 59 mm.
Thermal break via bar.
ASSEMBLY
- Fixed and opening sections using pin brackets.
- All these assembly parts must be made of aluminium and/or stainless steel.
- The cuts will be sealed with a "Small-Joint" type product or similar.
GLASS
Single or insulated glass from 8 to 42 mm thick, held in place by two EPDM seals and a clipped glazing bead with a minimum height of 21 mm (rebate depth).
Glazing beads must be on the inside of the structure.
DRAINAGE
Drainage of any water infiltration is provided by oblong holes in the bottom rail and the installation of nozzles with non-return valves.
This is done by drilling or punching.
Drainage of the door leaf and threshold is achieved through oblong holes and the installation of nozzles with non-return valves.
FRENCH WINDOW FRAMES
- Weatherproofing: by compressing two EPDM seals when closing and balancing the pressure on the frame.
- Fittings: reversible rebated hinges, fitted after frame assembly. Height adjustment by counter-wedge. Made of aluminium and/or stainless steel.
- Locking: 1/4-turn espagnolette handle in lacquered aluminium for single or double-leaf frames. 2-point espagnolette with high and low strike plate. Additional locks available.
TILT-AND-TURN FRAME
- Weatherproofing: by compression of two EPDM seals.
- Fittings and locking: single-control fitting with rotating handle, rods, locking compasses and anti-mishandling system.
BELLOW FRAME
- Sealing: by compression of 2 EPDM seals.
- Fittings: 2 to 4 hinges depending on the width and weight of the glazing. Hinges identical to those used on French windows.
- Locking: clamp latch:
- 1 latch for sashes up to 800 mm
- 2 latches for sashes over 800 mm
DOORS ON HINGES
- Sealing: by compression of 2 rotating EPDM rebate seals.
- Fittings: 2 to 4 surface-mounted hinges, adjustable according to the width and weight of the glazing.
- Locking: 1, 2 or 3-point lock, with bolt controlled by aluminium handle and stainless steel tilting security bolt, controlled by European cylinder.
MAXIMUM DIMENSIONS
| Type | Width (mm) | Height (mm) |
|---|---|---|
| Single-leaf French window | 1200 | 2300 |
| Double French window | 2200 | 2300 |
